Pooltester

Pooltesters are mainly used in the wellness sector and, even if the name doesn’t hint at it, they are also used for the analysis of drinking and industrial waters. In many countries, for example, drinking and industrial waters must be disinfected with chlorine which requires that they be subjected to consistent controls. hotels worldwide already use the Water-i.d. Pooltester for guest swimming pools, and also to determine the quality of their drinking and general waters. Water-i.d. Pooltesters are even used by well-known international aid organizations to also control drinking water plants in crisis regions. Here too, people rely on Water-i.d.’s quality standards.

Pooltester

Reagents

Reagent tablets offer the highest level of assurance that always the exact amount of reagent needed will be used. Most marketed tablet types, such as DPD for determining Chlorine in water, are regulated by strict international standards aimed at guaranteeing that all tablets with that designation (e.g. DPD 1) can also be used in all designated measurement devices made by any manufacturer. Pooli. d. devices and reagents can therefore be combined with other manufacturer’s reagents, and this is also true the other way around. One of the questions discussed often is the difference between RAPID and Photometer tablets. Basically both detect the same content but are different in one important point: RAPID tablets contain a material which “bursts” the tablet, e.g. chemical pulp that expands upon contact with water. This “burst material” would, however, disrupt the light ray of the photometer (suspended particles) which is why RAPID tablets should never be used with electronic devices such as photometers.

Reagents

Comparator

Water-i.d. comparators provide you with access to professional water analysis. While these comparators are also, like Pooltesters, visual measurement devices, the arrangement of the measured colour to the scale – and the determination of the measurement value – is much more precise with comparators because the measurement is compared on a rotating colour scale (colour disc). there are no measurement results “between” individual colour scales. ergonomic design and high quality materials also simplify measurements. By using the adapter that is supplied with each comparator, the sample path-length can be extended and additional ranges can be measured.

Comparator

Balanced Water Kits

Balanced Water Kits area combination of the comparator and the specialmethod of range Water-i.d. Depending on the equipment,the seterlaubthemeasurement of chlorineand pHusing thecomparatormethod, alkalinityand calciumhardnessand cyanuric acidusingthetablet countwith theNessler(turbiditymethod).The summaryof these parameters inaset is thehandiness andthe needsof specificusers, such asthe boilerindustry,owed.

Balanced Water Kits

Photometer

The photometry is a method of analysis which is often used. Whether public bathhouse, food and beverage industry, laboratories, or industrial disinfection - are everywhere photometer used for the determination of concentrations in solutions. The PrimeLab of Water-i.d. is the world's first photometer for the entire visible color spectrum with only one light source and only one sensor. The unique sensor of JENCOLOR, combined with the 10-year experience of Water-i.d. in water analysis, this innovation made ​​possible. In addition, the PrimeLab / JENCOLOR sensor measures with a hitherto unknown devices with photometer accuracy. The Bluetooth technology (select models) and a programmed specifically for the PrimeLab PC software makes it easy to manage soielend measurement and customer data.

Photometer

Test strips

Test strips for the measurement of water values are enjoying greater popularity, because they provide a simple and rapid method for quick analysis. When compared to the visual measurements of the Pooltester, there is naturally a significant disadvantage in the size of the coloured field and thus in the possibility of making an exact comparison on the colour scale. The shelf-life of the Test Strips is substantially less than that of the reagent tablets that are being used in the Pool Testers. Yet this is compensated for by the simplicity of use, the ability to obtain rapid measurements, and optimal pricing.

Test strips

Bacteria testing

The need for theprovisionof certaintypes of bacteriaissometimesrequired by law,but on the otherhand,givengenerallyfor health reasons,as wellastodisinfectantto be usedtovoteoncertain pathogenstargeted. Withthe pooli.d.Bacterial testsyou have a simple,reliable andcost effective producton handasColiformbacteriatodetecttargeted. Automotive application,"DipSlidetests"among other thingsto test forbacteria inwater tanks,withindustrial userssuch asthe leatherindustry, butalsofor surface measurement,egin swimming pools.

Bacteria testing

Electronic Meter

Without requiring additional reagents (tablets, drops, etc.), the Electronic Meters offer an absolutely professional way to measure various water values; such as, for example, conductivity, salinity (total dissolved solids), and pH value. The established value is displayed on the device within seconds after dipping the device in sample liquid. The sensitive electrodes, however, should always be kept damp. They should becalibrated at regular intervals, preferably before each measurement, by using a reference fluid. Both the batteries and the electrodes can be changed. The working range of the Electronic Meter is between 0 - 50°C; depending on the model temperature can be compensated for by determining the measurement value.

Electronic Meter

FlexiTester ®

Water-i.d.® FlexiTester provides you with access to semiprofessional water analysis. While FlexiTesters are -like Pooltesters- visual measurement devices, the arrangement of the measured colour to the scale – and the determination of the measurement value – is much more precise with FlexiTesters because the measurement is compared to an ongoing colourscale on a parameter-stick. There are no measurement results “between” individual colour scales. Ergonomic design and high quality materials also simplify measurements. So far, 37 different parameter-methods can be tested with the same basic model. Just a different paramter-stick and reagents are needed to extend your FlexiTester kit.

FlexiTester ®

Mini-Kits

Water-i.d. Mini-Kits are based on the titration method where reagents are added until a color change applies. The amount of reagents added (e.g. tablets) is entered into a formula to calculate the measurement value. ® Innovative Water-i.d. tablet push-through blister makes ® adding tablets easy. Never the less, Water-i.d. reagent tablets for Mini-Kits are also available as 250 tablets in glass bottles with dessicant. Another method is the turbidity method where reagents added to the water sample lets it turn cloudy, whilst the level of cloudiness defines the water value. The titration as well as the turbidity method are both easy and reliable methods to determine water parameter values.

Mini-Kits

Incubators

The definition of a dipslide is a means of testing the microbial content of liquids or surfaces. It consists of a plastic carrier bearing a sterile culture medium which can be dipped in the liquid or pressed on to the surface to be sampled. It is than incubated for 48 hours at a spedific temperature to allow microbial growth. The resulting microbial colonies are estimated by reference to a chart. If the treatment programme is effective, the dipslide count will 4 be consistently low (<10 ). If a high result is obtained, the test should be repeated and the treatment programme checked. Water-i.d. dipslides for bacterial testing are provided as 10 dipslides in a box. Water-i.d. offers a variety of incubators along with the dipslide range.

Incubators

Contact us

Do you have any questions? Please do not hesitate to contact us directly. Our team will come back to you within a matter of hours to help you.

  • Water-i.d. GmbH

    Daimlerstraße 20

    D-76344 Eggenstein

    Germany

  • 49.(0) 721 - 782029-0

  • info@water-id.com